[cisco-voip] Cause 0x80AA Switching Equipment Congestion
Dave Wolgast
dwolgas1 at rochester.rr.com
Fri Mar 16 12:13:53 EDT 2012
Has anyone seen this before? We are not able to send/receive calls via our
PRIs and get this cause code. Here is the full ISDN q931 output:
Mar 16 11:06:38.652: ISDN Se0/1/0:23 Q931: RX <- SETUP pd = 8 callref =
0x0283
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x2183, '8168779065'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '7777'
Plan:Unknown, Type:Unknown
Mar 16 11:06:38.652: ISDN Se0/1/0:23 Q931: Received SETUP callref = 0x8283
callID = 0x240D switch = primary-ni interface = User
Mar 16 11:06:38.656: ISDN Se0/1/0:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x8283
Cause i = 0x80AA - Switching equipment congestion
Mar 16 11:06:39.812: ISDN Se0/1/0:23 Q931: RX <- SETUP pd = 8 callref =
0x0284
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x2183, '8168779065'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '7777'
Plan:Unknown, Type:Unknown
Mar 16 11:06:39.812: ISDN Se0/1/0:23 Q931: Received SETUP callref = 0x8284
callID = 0x240E switch = primary-ni interface = User
Mar 16 11:06:39.816: ISDN Se0/1/0:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x8284
Cause i = 0x80AA - Switching equipment congestion
Some research shows a potential issue with bad DSPs, but that doesn't
appear to be the case here.
Any help is appreciated.
--
Dave Wolgast
Livonia, NY
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120316/bc8a6547/attachment.html>
More information about the cisco-voip
mailing list