[cisco-voip] CSIM Start Command

[Mike King]

You would think that.  :-)

One of the support forums had debug:
https://supportforums.cisco.com/thread/299206

A blog I found had a pretty elegant workaround:
a loopback configured on each router that allows telnet to/from the
loopback IP only

Obviously, it'd just be nice if you could do it straight from the SSH
terminal.

Mike


On Wed, Mar 21, 2012 at 10:27 AM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  What do you mean? SSH is just the protocol to access the router cli, the
> command should work regardless of using telnet or ssh to access the router.
> ****
>
> ** **
>
> ** **
>
> Matthew G. Loraditch - CCVP, CCNA, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> voice. 410.252.8830
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>
> ****
>
> ** **
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Mike King
> *Sent:* Wednesday, March 21, 2012 10:22 AM
> *To:* Cisco VoIPoE List
> *Subject:* [cisco-voip] CSIM Start Command****
>
> ** **
>
> I know it's an hidden ios (undocumented) IOS command, but does anyone know
> if "csim start" would ever be expected to work with SSH? ****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120321/d6896765/attachment.html>