[cisco-voip] CSIM Start Command

[Matthew Loraditch]

Well I'll be darned, that is weird


Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>


From: michael.p.king at gmail.com [mailto:michael.p.king at gmail.com] On Behalf Of Mike King
Sent: Wednesday, March 21, 2012 11:07 AM
To: Matthew Loraditch
Cc: Cisco VoIPoE List
Subject: Re: [cisco-voip] CSIM Start Command

You would think that.  :-)

One of the support forums had debug:
https://supportforums.cisco.com/thread/299206

A blog I found had a pretty elegant workaround:
a loopback configured on each router that allows telnet to/from the loopback IP only

Obviously, it'd just be nice if you could do it straight from the SSH terminal.

Mike


On Wed, Mar 21, 2012 at 10:27 AM, Matthew Loraditch <MLoraditch at heliontechnologies.com<mailto:MLoraditch at heliontechnologies.com>> wrote:
What do you mean? SSH is just the protocol to access the router cli, the command should work regardless of using telnet or ssh to access the router.


Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830<tel:410.252.8830>
fax.  410.252.9284<tel:410.252.9284>

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>


From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Mike King
Sent: Wednesday, March 21, 2012 10:22 AM
To: Cisco VoIPoE List
Subject: [cisco-voip] CSIM Start Command

I know it's an hidden ios (undocumented) IOS command, but does anyone know if "csim start" would ever be expected to work with SSH?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120321/fff89cc4/attachment.html>