[cisco-voip] LRG with H.323 GWs not hunting

[ccieid1ot]

How does your config on the gateways look?

On Wed, May 2, 2012 at 7:07 AM, Khemani, Haresh <hkhemani at cppib.ca> wrote:

> We have 2 x H.323 Gateways with a PRI connected to each. There is a Local
> Route Group with both H.323 Gateways in it. Route List points to this
> single LRG.****
>
> ** **
>
> We were doing some redundancy testing and I shut down the PRI on GW1 and
> outbound calls wouldn’t failover to GW2. I have the Stop Routing on
> Unallocated Number Flag set to disable in Service Parameters yet it
> wouldn’t hunt. Reset the RL, CCM service, GW no luck. Even tried RL with 2
> RGs with each GW in its own RG yet does not work. ****
>
> ** **
>
> CUCM version is 8.5.1.12900-7****
>
> ** **
>
> Any ideas?****
>
> ** **
>
> ** **
>
> ________________________________________________
>
> *Haresh Khemani
> *Voice and Network Analyst | Information Services
>
> ****
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
duy
CCIE #27737 Voice
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120502/bf1da164/attachment.html>