[cisco-voip] isdn status - layer 1 'shutdown'?

[Erick Wellnitz]

It stopped working this afternoon.

The provider can't get to their smartjack so I guess I won't worry until
they can test clean.

On Wed, May 2, 2012 at 4:42 PM, Thomas Bader <tbader at netcologne.de> wrote:

> ... has it been working before?
>
> From my experience Layer 1 is a cabling problem, even if it has been
> working before.
>
> All the best,
>
> Thomas
>
>
> Am 02.05.2012 um 22:16 schrieb Erick Wellnitz:
>
> > IOS 12.4(24)T7
> >
> > I have a PRI which had layer 1 in a 'deactivated' state.  I did a shut -
> no shut on the controller and now it shows shutdown.
> >
> > Is this to be expected or is there something I'm missing.
> >
> >
> > controller T1 0/0/0
> >  cablelength long 0db
> >  pri-group timeslots 1-24
> >  description pri
> >
> > linecode and framing are indeed the defaults of B8ZS and ESF
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120502/cc3586a4/attachment.html>