[cisco-voip] CUWL and UCS activation

[Erick Wellnitz]

Only items related to unity/unity connection are:

UWL-UPG-CM+UTY-PRO

No pak for unity.

With that said, once I activate the UCSS paks I should be able to migrate
from Unity to Connection, correct?

On Mon, May 7, 2012 at 4:09 PM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  If you got CUWL there should be a connection PAK if you look at your
> order detail one of the line items under the master CUWL part should have
> been said PAK
>
>
>
> Matthew G. Loraditch - CCVP, CCNA, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> voice. 410.252.8830
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [
> cisco-voip-bounces at puck.nether.net] on behalf of Erick Wellnitz [
> ewellnitzvoip at gmail.com]
> *Sent:* Monday, May 07, 2012 3:59 PM
> *To:* Buchanan, James
> *Cc:* cisco-voip
> *Subject:* Re: [cisco-voip] CUWL and UCS activation
>
>  Okay...second question and I know these are probably fairly basic but as
> my first project at this firm I need to make sure I get it right.
>
> I have PAKs for everything (CUCM, SME, CUP, MeetingPlace) except for
> Connection.  Is this normal?   Do I even need a PAK for Connection or are
> the server licenses available by default on install and I jsut need to add
> the user/mailbox licenses?
>
>
>
> On Mon, May 7, 2012 at 2:43 PM, Buchanan, James <jbuchanan at presidio.com>wrote:
>
>>  On this, I’ve always simply entered the ESW contract number and have
>> had no problems accessing the software.****
>>
>> ****
>>
>> *James Buchanan*|* UC Technology Manager *| *Presidio South *|*Presidio Networked Solutions
>> *****
>>
>> *12 Cadillac Dr Ste 130 Brentwood, TN 37027 *|* **jbuchanan at presidio.com*
>> **
>>
>> *D: 615-866-5729* | *F:615-866-5781*  *www.presidio.com*<http://www.presidio.com/>
>> ****
>>
>> ****
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Erick Wellnitz
>> *Sent:* Monday, May 07, 2012 2:37 PM
>> *To:* cisco-voip
>> *Subject:* [cisco-voip] CUWL and UCS activation****
>>
>> ****
>>
>> So, I was handed a box and told 'figure it out'.****
>>
>> ****
>>
>> Purchased for version 8.0 and none of the PAKs have been used.****
>>
>> ****
>>
>> Here is what I'm a bit fuzzy on:  It asks for all kinds of information
>> when trying to activate the UCSS PAK(s).  We're installing on VMWare but
>> we're going directly to 8.6.  I guess my question is:****
>>
>> ****
>>
>> Do I need to enter anything in the two boxes related to system setup?****
>>
>> ****
>>
>> Description of purchased software tied to the software subscription.****
>>
>> Description of purchased software tied to the software subscription.****
>>
>> "IF CCM 5.0, Unity, Unity Connection, MeetingPlace or MeetingPlace
>> Express, enter the MAC address of the software system tied to this
>> subscription"****
>>
>> ****
>>
>> "If any other Voice product, describe your system configuration, date
>> initially purchased and any other identifying information that you have
>> available"****
>>
>> ****
>>
>> I understand that once this is activated, I can request the 8.6 kit from
>> PUT.****
>>
>> *This message w/attachments (message) is intended solely for the use of
>> the intended recipient and may contain information that is privileged,
>> confidential or proprietary. If you are not an intended recipient, please
>> notify the sender, and then please delete and destroy all copies and
>> attachments.  Please be advised that any review or dissemination of, or the
>> taking of any action in reliance on, the information contained in or
>> attached to this message is prohibited.*****
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120508/dca1b193/attachment.html>