[cisco-voip] SIP trunk in Route Group

Gregory Wenzel gwenzel at conres.com
Wed May 16 11:15:35 EDT 2012


Have you pointed to the trunk directly from a route pattern ? that would cause the trunk not to show up in the route group

Gregory Wenzel
Solution Engineer, CCNP Voice
Continental Resources Inc
SNR - 856-599-VOIP (8647)
gwenzel at conres.com

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Damian Turburville
Sent: Wednesday, May 16, 2012 11:13 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] SIP trunk in Route Group

Hi,
Does anyone know why my SIP trunks do not show up in the available devices list when trying to create a Route Group?
It is a new RG with no other devices selected on a CUCM 6.1 system.
It is a new SIP trunk that (at the moment) has a dummy IP address so it is not working as yet, could that be why?
Cheers,
DT

This message w/attachments (message) is solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments, and be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited. 
Unless specifically indicated, this message is not an offer to sell or a solicitation of any products.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120516/0730e3d0/attachment.html>


More information about the cisco-voip mailing list