[cisco-voip] Dial-Peer Catch All question

Nick Matthews matthnick at gmail.com
Wed May 23 15:38:47 EDT 2012


That should work - your problem doesn't appear to be directly related
to this configuration.

-nick

On Wed, May 23, 2012 at 3:05 PM, cisco.voip <cisco.voip at verizon.net> wrote:
> All, I am using 7 digit dialing within the network, I was looking at a way
> to do a catch all,
> so if a 7 digit number doesn't match an existing dial peer, it would hit
> dial peer 555 (see Below)
> and be routed to our default voip gateway - doesn't seem to work with this
> config and is affecting other
> 7 digit calls, what is the best way to do this?
>
>
> dial-peer voice 34 voip
>  preference 10
>  destination-pattern 652....
>  session protocol sipv2
>  session target ipv4:10.1.1.1
>  voice-class codec 1
>  no vad
>
>
> dial-peer voice 555 voip
>  desc catch-all
>  preference 1
>  destination-pattern .......
>  session protocol sipv2
>  session target ipv4:10.2.2.1
>  voice-class codec 1
>  no vad
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list