[cisco-voip] T/E 1 Crossover cable DB15 to RJ45 Pin Out?

[Lelio Fulgenzi]

How about using a regular DB15 to RJ45 adapter/cable then using this diagram to create a crossover jack?

http://www.gl.com/images/t1e1cablepinout1.gif

Sent from my iPhone...

"There's no place like 127.0.0.1"

On May 24, 2012, at 5:39 AM, Robin Clayton <Robin.Clayton at rrfa.org.uk> wrote:

> Dear All.
>  
> Done a bit of a google but can’t find a diagram for DB15 to RJ45 Crossover cable.
>  
> Anyone able to help?
>  
> Thanks
>  
> Rob
>  
> =========================
> Robin Clayton
>  
> Network Transition Manager
> Richard Rose Federation
> Richard Rose Central Academy
> Victoria Place
> Carlisle
> Cumbria
> CA1 1LY
>  
> Tel: 01228 822075
> www: www.rrfa.org.uk
>  
>  
> --------------------------------------------------------------------------------------------------------------
> 
> Important Notice:
> 
> This e-mail and any attachment are confidentialand may be privileged 
> or otherwise protected from disclosure. It is solely intended for the
> person(s) named above. If you are not the intended recipient, any 
> reading, use, disclosure, copying or distribution of all or parts of this 
> e-mail or associated attachments is strictly prohibited. If you are not 
> an intended recipient, please notify the sender immediately by 
> replying to this message or by telephone and delete this e-mail and 
> any attachments permanently from your system.
> 
> The Richard Rose Federation
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120524/780cfe92/attachment.html>