[cisco-voip] Anyone with Dialogic SR-140 / RightFax experience?

[Jason Aarons (AM)]

Trying to figure out if I can point RightFax/SR-140 to multiple ip addresses based on destination address.

I'm pretty sure the RightFax 9.4 / SR-140 doing H323/T38  can only point to 1 ip address or RightFax can route to particular SR-140, then it's up to your peer PBX/H323 gateway to do the TEHO/Least Cost Routing etc.


Example customer request, they only have a couple SR-140s and locations in many more cities and want outbound to go out the end user's city.

We have some scope items that I want to make sure that we can meet for the outbound faxing project.

*             Outbound faxes will use the PRI/trunk of the site of the originating fax.  For example, if the fax is sent out of Tokyo it will use the local Tokyo PRI for the outbound call.
*             If the outbound trunk is down, the fax can route out of a secondary path.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120525/a95bb190/attachment.html>