[cisco-voip] cisco-voip Digest, Vol 109, Issue 2
bashir awan
abdullah.bashir81 at gmail.com
Sun Nov 4 22:53:40 EST 2012
Please unsubscribe my account
On Fri, Nov 2, 2012 at 9:00 PM, <cisco-voip-request at puck.nether.net> wrote:
> Send cisco-voip mailing list submissions to
> cisco-voip at puck.nether.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://puck.nether.net/mailman/listinfo/cisco-voip
> or, via email, send a message with subject or body 'help' to
> cisco-voip-request at puck.nether.net
>
> You can reach the person managing the list at
> cisco-voip-owner at puck.nether.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of cisco-voip digest..."
>
>
> Today's Topics:
>
> 1. ds0-group with loop start on AS5400 (Joseph Mays)
> 2. Re: cisco.com/go/license down? (Jason Aarons (AM))
> 3. Re: cisco.com/go/license down? (Jason Aarons (AM))
> 4. jabber Presence html (John Van Laecke)
> 5. Re: jabber Presence html (Mike Wilusz (miwilusz))
> 6. Re: jabber Presence html (John Van Laecke)
> 7. Re: Multicast MoH issue from branch router (John Van Laecke)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 1 Nov 2012 12:20:18 -0400
> From: "Joseph Mays" <mays at win.net>
> To: <cisco-voip at puck.nether.net>
> Subject: [cisco-voip] ds0-group with loop start on AS5400
> Message-ID: <46F71106ABC748659EACE9D504438D83 at win2snvu0x4eg9>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Trying to configure a ds0-group with loop start on a 5400. The t1 in
> question connects to a channel bank that breaks the t1 out into individual
> ds0's. The problem is that the 5400 is never sending a loop start signal
> (0101) to the the channel bank, so the channel bank won't activate the ds0.
> Is there any example anywhere of a t1 ds0 group and voice port
> configuration for loop start that I can look at to figure out why I can't
> get this to send a loop start?
>
> Here is the t1 and voice-port so far.
>
> controller T1 6/6
> framing esf
> linecode b8zs
> ds0-group 1 timeslots 1-24 type sas-loop-start
> cas-custom 1
> trunk-group WNpots01
> description T1 1 to pots01.armplc.win.net channel bank
>
> voice-port 6/6:1
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20121101/ab890e52/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Thu, 1 Nov 2012 12:47:22 -0400
> From: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com>
> To: Kenneth Hayes <kennethwhayes at gmail.com>, "Erick B."
> <erickbee at gmail.com>
> Cc: "cisco-voip \(cisco-voip at puck.nether.net\)"
> <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] cisco.com/go/license down?
> Message-ID:
>
> <4E38DB0A1959B04C8C83EDCF069B53ED0D2B536966 at USISPCLEXDB01.na.didata.local>
>
> Content-Type: text/plain; charset="windows-1252"
>
> Seems to be intermittent, then when I I got the web page, entered my PAK,
> however after 5 minutes I got a timeout. I'll try again later today.
>
> From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of Kenneth Hayes
> Sent: Thursday, November 01, 2012 11:25 AM
> To: Erick B.
> Cc: cisco-voip (cisco-voip at puck.nether.net)
> Subject: Re: [cisco-voip] cisco.com/go/license down?
>
>
> I had issues with SSO earlier myself
> Sent from my iPhone
> Thanks,
> Kenneth W. Hayes
>
>
> On Nov 1, 2012, at 11:21 AM, "Erick B." <erickbee at gmail.com<mailto:
> erickbee at gmail.com>> wrote:
> Works for me, from chicago land...
>
> On Thu, Nov 1, 2012 at 10:11 AM, Scott Voll <svoll.voip at gmail.com<mailto:
> svoll.voip at gmail.com>> wrote:
>
> Works on the West coast.
>
> YMMV
>
> Scott
>
> On Thu, Nov 1, 2012 at 7:38 AM, Jason Aarons (AM)
> <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>>
> wrote:
>
> For http://www.cisco.com/go/license I get the SSO login, after that just
> "Redirecting your request" and nothing else...same with other links to
> register PAKs
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> itevomcid
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20121101/4d975559/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Thu, 1 Nov 2012 13:40:20 -0400
> From: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com>
> To: Kenneth Hayes <kennethwhayes at gmail.com>, "Erick B."
> <erickbee at gmail.com>
> Cc: "cisco-voip \(cisco-voip at puck.nether.net\)"
> <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] cisco.com/go/license down?
> Message-ID:
>
> <4E38DB0A1959B04C8C83EDCF069B53ED0D2B5369AE at USISPCLEXDB01.na.didata.local>
>
> Content-Type: text/plain; charset="windows-1252"
>
> Hmmmm
>
> " Unfortunately, we are unable to address your concerns due to scheduled
> system maintenance. "
>
> As soon as the maintenance is completed, we will make sure to prioritize
> your issue and provide you the best resolution possible.
>
> On behalf of Cisco, we would like to extend our sincere apologies for the
> inconvenience this has caused. Your business is very important to us and
> we will make every effort to ensure that your Service Requests are handled
> to your satisfaction."
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of Kenneth Hayes
> Sent: Thursday, November 01, 2012 11:25 AM
> To: Erick B.
> Cc: cisco-voip (cisco-voip at puck.nether.net)
> Subject: Re: [cisco-voip] cisco.com/go/license down?
>
>
> I had issues with SSO earlier myself
> Sent from my iPhone
> Thanks,
> Kenneth W. Hayes
>
>
> On Nov 1, 2012, at 11:21 AM, "Erick B." <erickbee at gmail.com<mailto:
> erickbee at gmail.com>> wrote:
> Works for me, from chicago land...
>
> On Thu, Nov 1, 2012 at 10:11 AM, Scott Voll <svoll.voip at gmail.com<mailto:
> svoll.voip at gmail.com>> wrote:
>
> Works on the West coast.
>
> YMMV
>
> Scott
>
> On Thu, Nov 1, 2012 at 7:38 AM, Jason Aarons (AM)
> <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>>
> wrote:
>
> For http://www.cisco.com/go/license I get the SSO login, after that just
> "Redirecting your request" and nothing else...same with other links to
> register PAKs
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> itevomcid
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20121101/e8530167/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 4
> Date: Thu, 1 Nov 2012 21:19:12 +0000
> From: John Van Laecke <John.VanLaecke at ghd.com>
> To: "cisco-voip (cisco-voip at puck.nether.net)"
> <cisco-voip at puck.nether.net>
> Subject: [cisco-voip] jabber Presence html
> Message-ID:
>
> <CF2E16827204E249BB155D2C1F5C1EAB1AA2CEF6 at GLB-EXMBX-001.ghdnet.internal>
>
> Content-Type: text/plain; charset="us-ascii"
>
>
> Hello all,
>
> I'm currently trying to add cisco presence status to our corporate
> directory web page, has anyone done this before and has anyone come up with
> a simple way to achieve this ?
>
> Using some methods is dependent on jabber being open is there anything
> that can be done so jabber isn't required ?
>
> Hope to hear from you soon.
>
>
> Cheers,
>
> John
>
>
>
> _____________________
> This email and all attachments are confidential. For further important
> information about emails sent to or from GHD or if you have received this
> email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20121101/e8c8ea01/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 5
> Date: Thu, 1 Nov 2012 22:10:14 +0000
> From: "Mike Wilusz (miwilusz)" <miwilusz at cisco.com>
> To: John Van Laecke <John.VanLaecke at ghd.com>, "cisco-voip
> (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] jabber Presence html
> Message-ID:
> <751F47C39D30604DBBE42896FD3869E6239F552E at xmb-rcd-x01.cisco.com>
> Content-Type: text/plain; charset="windows-1252"
>
> Have your developers look at the Presence Web Service SOAP/REST API. This
> will allow you to query presence status within an application/web page and
> publish it.
>
> http://developer.cisco.com/web/cupapi/pws
>
> -mike
>
> From: John Van Laecke <John.VanLaecke at ghd.com<mailto:
> John.VanLaecke at ghd.com>>
> Date: Thursday, November 1, 2012 5:19 PM
> To: "cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>" <
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
> Subject: [cisco-voip] jabber Presence html
>
>
> Hello all,
>
> I?m currently trying to add cisco presence status to our corporate
> directory web page, has anyone done this before and has anyone come up with
> a simple way to achieve this ?
>
> Using some methods is dependent on jabber being open is there anything
> that can be done so jabber isn?t required ?
>
> Hope to hear from you soon.
>
>
> Cheers,
>
> John
>
>
>
> _____________________
> This email and all attachments are confidential. For further important
> information about emails sent to or from GHD or if you have received this
> email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20121101/28aed53b/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 6
> Date: Thu, 1 Nov 2012 22:23:23 +0000
> From: John Van Laecke <John.VanLaecke at ghd.com>
> To: "Mike Wilusz (miwilusz)" <miwilusz at cisco.com>, "cisco-voip
> (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] jabber Presence html
> Message-ID:
>
> <CF2E16827204E249BB155D2C1F5C1EAB1AA2D079 at GLB-EXMBX-001.ghdnet.internal>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Mike,
>
> Do you have and examples ?
>
>
> From: Mike Wilusz (miwilusz) [mailto:miwilusz at cisco.com]
> Sent: Friday, 2 November 2012 8:10 AM
> To: John Van Laecke; cisco-voip (cisco-voip at puck.nether.net)
> Subject: Re: [cisco-voip] jabber Presence html
>
> Have your developers look at the Presence Web Service SOAP/REST API. This
> will allow you to query presence status within an application/web page and
> publish it.
>
> http://developer.cisco.com/web/cupapi/pws
>
> -mike
>
> From: John Van Laecke <John.VanLaecke at ghd.com<mailto:
> John.VanLaecke at ghd.com>>
> Date: Thursday, November 1, 2012 5:19 PM
> To: "cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>" <
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
> Subject: [cisco-voip] jabber Presence html
>
>
> Hello all,
>
> I'm currently trying to add cisco presence status to our corporate
> directory web page, has anyone done this before and has anyone come up with
> a simple way to achieve this ?
>
> Using some methods is dependent on jabber being open is there anything
> that can be done so jabber isn't required ?
>
> Hope to hear from you soon.
>
>
> Cheers,
>
> John
>
>
>
> _____________________
> This email and all attachments are confidential. For further important
> information about emails sent to or from GHD or if you have received this
> email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
> _____________________
> This email and all attachments are confidential. For further important
> information about emails sent to or from GHD or if you have received this
> email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20121101/13ae35a8/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 7
> Date: Thu, 1 Nov 2012 22:36:19 +0000
> From: John Van Laecke <John.VanLaecke at ghd.com>
> To: gr11 <grccie at gmail.com>, "cisco-voip at puck.nether.net"
> <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] Multicast MoH issue from branch router
> Message-ID:
>
> <CF2E16827204E249BB155D2C1F5C1EAB1AA2D0CE at GLB-EXMBX-001.ghdnet.internal>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Under call manager fallback whats your config for multicast ? or are you
> doing multicast over the wan ?
>
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of gr11
> Sent: Thursday, 1 November 2012 8:22 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Multicast MoH issue from branch router
>
> I am having this issue, one of the branch router is not streaming
> multicast moh. I was told it was working and has stopped working (not sure
> though)...when the user is put on hold - there is silence and the output of
> sh ccm music-on-hold is as below:
>
> sh ccm music
> Current active multicast sessions : 1
> Multicast RTP port Packets Call Codec Incoming
> Address number in/out id Interface
> ===================================================================
> 239.1.1.1 16384 0/0 77911 g711ulaw
> <<<<< no interface and packets stay at 0
>
>
> CUCM - checked multicast is enabled and MRGL is assigned to DP ..On the
> router max-dn command was missing under fallback...rest is configured
> properly..with multicast route and correct file name..if i try adding
> max-dn i get below error and i am not even able to add max-dn 1....
> %DIALPEER_DB-3-ADDPEER_MEM_THRESHOLD: Addition of dial-peers limited by
> available memory
>
> sh ephone summ output shows - no MOH file...i have tried removing and
> re-adding fallback and also re uploading the MoH file....could the issue be
> due to max-dn not configured....??? or it could be two separate issues..?
> Router is 3845 and IOS is 12.3(11r)T2....Any clue if any one came across
> this????
>
> sh ephone summ
> hairpin_block:
> Max 500, Registered 0, Unregistered 0, Deceased 0 High Water Mark 501,
> Sockets 0
> ephone_send_packet process switched 0
>
>
> Max Conferences 12 with 0 active (4 allowed)
> Skinny Music On Hold Status
> Active MOH clients 0 (max 830), Media Clients 0, B-ACD Clients 0
> No MOH file loaded <<<<<<<<<<< even thoug file is in flash and triple
> checked and reuploaded.....
>
>
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
>
> _____________________
> This email and all attachments are confidential. For further important
> information about emails sent to or from GHD or if you have received this
> email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
> _____________________
> This e-mail has been scanned for viruses by MessageLabs.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20121101/8614ec1e/attachment-0001.html
> >
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> End of cisco-voip Digest, Vol 109, Issue 2
> ******************************************
>
--
Wassalam alykum
Regards,
Muhammad Bashir Awan
+092-03349885340
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121105/f65879ac/attachment.html>
More information about the cisco-voip
mailing list