[cisco-voip] DTMF on VG224 with analogue Voicemail

[Louis Koekemoer (ZA)]

   I need to integrate to an analogue Voicemail system(Long discussion) to CUCM 8.x. So when calling from one phone to the other we reach the voicemail pilot, but due to the fact that we integrating with Analogue(VG224) the VM provider can only determine which mailbox this is for by the DTMF, So in the past your required a USB to serial converted plugged into a MCS server to achieve this. Unfortunately we are using UCS servers and this option is not available anymore. I found some information on the command "vm-integration", but has not been very successful so far. Any ideas?


Regards

Louis Koekemoer
Principal Systems Engineer: Converged Communications
Dimension Data
Tel: +27 (11) 575 6560
Mobile: +27 (71) 680 8790
Fax: +27 (11) 576 6560
Louis.koekemoer at dimensiondata.com<mailto:Louis.koekemoer at dimensiondata.com>
Planned Travel -
Planned Leave - 01/12/2012 - 06/01/2013
For more information about Dimension Data, please go to  www.dimensiondata.com<http://www.dimensiondata.com/>
P Please consider the environment before printing this email

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121105/0dd8931f/attachment.html>