[cisco-voip] DTMF on VG224 with analogue Voicemail

[Lelio Fulgenzi]

I'm not 100% sure, but you might be able to use one of these. 

http://www.dialogic.com/en/products/gateways/enterprise-media-gateways.aspx 

I use it to go from PBX to Unity Connection, but you may be able to use it the other way around, i.e. Cisco IP to analog voice mail. It has a serial port. Giving them a call would be the best way. 

Also, I found this, might be the same you found. Not much help, but thought I'd share. 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_system-guide_chapter_011110.html 

There are USB to serial cables, and as far as I know, there is the ability for a VM to access these devices. But you're right, it might be a dog to get working. 

I think a VG248 as Ryan suggested would be the easiest way. There are a number available as refurbished. Might be hard getting it on SmartNet though since they're EOL. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Ryan Ratliff" <rratliff at cisco.com> 
To: "Louis Koekemoer (ZA)" <louis.koekemoer at dimensiondata.com> 
Cc: cisco-voip at puck.nether.net 
Sent: Monday, November 5, 2012 10:34:20 AM 
Subject: Re: [cisco-voip] DTMF on VG224 with analogue Voicemail 

If you can dig up a VG248 it can do SMDI via an on-board serial port. 
Otherwise the last I heard was that CMI still required a physical server. 


-Ryan 


On Nov 5, 2012, at 8:54 AM, Louis Koekemoer (ZA) < louis.koekemoer at dimensiondata.com > wrote: 





I need to integrate to an analogue Voicemail system(Long discussion) to CUCM 8.x. So when calling from one phone to the other we reach the voicemail pilot, but due to the fact that we integrating with Analogue(VG224) the VM provider can only determine which mailbox this is for by the DTMF, So in the past your required a USB to serial converted plugged into a MCS server to achieve this. Unfortunately we are using UCS servers and this option is not available anymore. I found some information on the command "vm-integration", but has not been very successful so far. Any ideas? 


Regards 

Louis Koekemoer 
Principal Systems Engineer: Converged Communications 
Dimension Data 
Tel: +27 (11) 575 6560 
Mobile: +27 (71) 680 8790 
Fax: +27 (11) 576 6560 
Louis.koekemoer at dimensiondata.com 
Planned Travel – 
Planned Leave - 01/12/2012 – 06/01/2013 
For more information about Dimension Data, please go to www.dimensiondata.com 
P Please consider the environment before printing this email 


This email and all contents are subject to the following disclaimer: 
"http://www.dimensiondata.com/emaildisclaimer" _______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121106/2c76bef3/attachment.html>