[cisco-voip] CUCM 8.5 bugg with VG224

[Heim, Dennis]

After hours I would try a no sccp, sccp and make sure you have the right version on the sccp. I have seem similar behavior before and it just takes a lot of TLC.

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
www.wwt.com<http://www.wwt.com/>

From: abbas Wali [mailto:abbaseo at gmail.com]
Sent: Friday, October 12, 2012 3:45 PM
To: Heim, Dennis
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM 8.5 bugg with VG224

Just did that now. for the node where the gateway and points are reg to. but no change. Just added one more point to check and that one not even gets registered or IP address or anything like that.

Thanks
Abbas

On 12 October 2012 20:38, Heim, Dennis <Dennis.Heim at wwt.com<mailto:Dennis.Heim at wwt.com>> wrote:
Under serviceability there should be a service for real time information service.

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
www.wwt.com<http://www.wwt.com/>

From: abbas Wali [mailto:abbaseo at gmail.com<mailto:abbaseo at gmail.com>]
Sent: Friday, October 12, 2012 3:33 PM
To: Heim, Dennis
Subject: Re: [cisco-voip] CUCM 8.5 bugg with VG224

reset/restart the gateway/endpoints/mgcp process alot of times but no change. sorry what do you mean by RIS service??
On 12 October 2012 20:26, Heim, Dennis <Dennis.Heim at wwt.com<mailto:Dennis.Heim at wwt.com>> wrote:
Have you tried resetting/restarting the RIS service?

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
www.wwt.com<http://www.wwt.com/>

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of abbas Wali
Sent: Friday, October 12, 2012 3:22 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] CUCM 8.5 bugg with VG224

Guys,

feels like there is a bug in CUCM 8.5 with Vg224. I have configured end points, they are showing up as rejected but in reality they are working fine can get them to call in and out. and fine with the fax/modems too. Even the RTMT says the end points registered. but CUCM says rejected. also early this week saw endpoints un registered for along time still they were working fine.

--
@bbas..



--
@bbas..



--
@bbas..
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121012/7172b619/attachment.html>