[cisco-voip] CUCM 8.5 bugg with VG224

[abbas Wali]

but this is an MGCP controlled gateway, SCCP should not play any part!! I
can though give it a go, its after hours anyway

Thanks

On 12 October 2012 20:46, Heim, Dennis <Dennis.Heim at wwt.com> wrote:

> After hours I would try a no sccp, sccp and make sure you have the right
> version on the sccp. I have seem similar behavior before and it just takes
> a lot of TLC.****
>
> ** **
>
> Dennis Heim****
>
> Sr. UC Engineer****
>
> World Wide Technology****
>
> Office: 314.212.1814****
>
> Email: dennis.heim at wwt.com****
>
> www.wwt.com****
>
> ** **
>
> *From:* abbas Wali [mailto:abbaseo at gmail.com]
> *Sent:* Friday, October 12, 2012 3:45 PM
> *To:* Heim, Dennis
> *Cc:* cisco-voip at puck.nether.net
>
> *Subject:* Re: [cisco-voip] CUCM 8.5 bugg with VG224****
>
> ** **
>
> Just did that now. for the node where the gateway and points are reg to.
> but no change. Just added one more point to check and that one not even
> gets registered or IP address or anything like that.
>
> Thanks
> Abbas
>
> ****
>
> On 12 October 2012 20:38, Heim, Dennis <Dennis.Heim at wwt.com> wrote:****
>
> Under serviceability there should be a service for real time information
> service. ****
>
>  ****
>
> Dennis Heim****
>
> Sr. UC Engineer****
>
> World Wide Technology****
>
> Office: 314.212.1814****
>
> Email: dennis.heim at wwt.com****
>
> www.wwt.com****
>
>  ****
>
> *From:* abbas Wali [mailto:abbaseo at gmail.com]
> *Sent:* Friday, October 12, 2012 3:33 PM
> *To:* Heim, Dennis
> *Subject:* Re: [cisco-voip] CUCM 8.5 bugg with VG224****
>
>  ****
>
> reset/restart the gateway/endpoints/mgcp process alot of times but no
> change. sorry what do you mean by RIS service??****
>
> On 12 October 2012 20:26, Heim, Dennis <Dennis.Heim at wwt.com> wrote:****
>
> Have you tried resetting/restarting the RIS service?****
>
>  ****
>
> Dennis Heim****
>
> Sr. UC Engineer****
>
> World Wide Technology****
>
> Office: 314.212.1814****
>
> Email: dennis.heim at wwt.com****
>
> www.wwt.com****
>
>  ****
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *abbas Wali
> *Sent:* Friday, October 12, 2012 3:22 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CUCM 8.5 bugg with VG224****
>
>  ****
>
> Guys,
>
> feels like there is a bug in CUCM 8.5 with Vg224. I have configured end
> points, they are showing up as rejected but in reality they are working
> fine can get them to call in and out. and fine with the fax/modems too.
> Even the RTMT says the end points registered. but CUCM says rejected. also
> early this week saw endpoints un registered for along time still they were
> working fine.
>
> --
> @bbas.. ****
>
>
>
>
> --
> @bbas.. ****
>
>
>
>
> --
> @bbas.. ****
>



-- 
@bbas..
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121012/0d27a297/attachment.html>