[cisco-voip] BE6K C220 servers
Steven Sarte
steven.sarte at gmail.com
Thu Oct 18 18:51:19 EDT 2012
I actually first downloaded the host upgrade utility ISO to upgrade all the firmware and drivers. I was told that you should upgrade all components.
Sent from my iPhone
On Oct 18, 2012, at 6:42 PM, "Mike " <mikeeo at msn.com> wrote:
> I did. Cisco Vmware 5.0 Update 1
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Steven Sarte
> Sent: Thursday, October 18, 2012 6:39 PM
> To: Mike
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] BE6K C220 servers
>
> Try using the VMWare Cisco Custom ESXi ISO. I had the same issue.
>
> Sent from my iPhone
>
> On Oct 18, 2012, at 6:25 PM, "Mike " <mikeeo at msn.com> wrote:
>
> I used CIMC , but couldn’t see the RAID set. I found an article that says you can install esxi 5 on the flash drive on the server itself which I did.
>
> I opened a case with TAC to find out the LSI Megaraid firmware is not supported on vmware 5. TAC says “down load the driver and call me back”
>
> Anyone ever upgraded the Megaraid firmware over CIMC?
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
> Sent: Thursday, October 18, 2012 4:59 PM
> To: Matthew Loraditch
> Cc: Mike Olivere; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] BE6K C220 servers
>
> +1 for CIMC
>
> -Ryan
>
> On Oct 18, 2012, at 12:52 PM, Matthew Loraditch <MLoraditch at heliontechnologies.com> wrote:
>
> Flash drive or use the CIMC and boot from ISO that way
>
>
> Matthew G. Loraditch - CCNP-Voice, CCNA, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> voice. 410.252.8830
> fax. 410.252.9284
>
> Twitter | Facebook | Website | Email Support
>
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Olivere
> Sent: Thursday, October 18, 2012 12:41 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] BE6K C220 servers
>
> I feel stupid asking this, but with the new be6k C220's not having a DVD drive how do we get esxi on it? I used a USB DVD but it only sees the little 3gig and 6 gig utility partitions
>
> Any ideas?
>
> Sent from my iPhone
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121018/1c431566/attachment.html>
More information about the cisco-voip
mailing list