[cisco-voip] ABC button on 9971 phones

[Eric Pedersen]

We're running CUCM 8.6(2a)SU2 and upgraded our 9971 phones to the latest firmware, 9-3-1-33.  There is now an 'ABC' softkey (for URI dialing apparently) in the offhook state or after pressing a key, and this pushes Speed Dial off to the More page which is aggravating for people who use abbreviated dials.  It's also confusing since it doesn't actually do anything until CUCM 9 as far as I know.  Is there any way to remove this? I installed the latest dev pack but it doesn't add  any feature control policy setting.

Thanks,
Eric


The contents of this message may contain confidential and/or privileged
subject matter. If this message has been received in error, please contact
the sender and delete all copies. Like other forms of communication,
e-mail communications may be vulnerable to interception by unauthorized
parties. If you do not wish us to communicate with you by e-mail, please
notify us at your earliest convenience. In the absence of such
notification, your consent is assumed. Should you choose to allow us to
communicate by e-mail, we will not take any additional security measures
(such as encryption) unless specifically requested.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121024/040e1bd8/attachment.html>