[cisco-voip] CUCM 8.6 DB Stopped / IP address blank

[Erick B.]

Nevermind, figured this out.  Issue on VM/ESXi networking side.

On Wed, Oct 24, 2012 at 3:18 PM, Erick B. <erickbee at gmail.com> wrote:
> Just seeing if anyone has any ideas on this, about to re-install.
>
> Had CUCM 8.6 up and running on VM Ware on UCS and site had power
> outage, ungraceful shutdown, etc.  The CUCM VM is up but has no IP
> address. Tried to set it back to original but it doesn't take, states
> address already exists. Set it to something else and changed it back
> and same message when we try original IP, address in use. The IP isn't
> in any arp cache or on any other devices and we even isolated the
> network interface on the VM and same error when we try to set it to
> the original IP.
>
> When we are on new IP, the service "A Cisco DB" doesn't start.  We
> can't login to GUI at all (Database communication error).
>
> Any other ideas to get this up before I start re-installing? Looks
> like fs/database is corrupt from ungraceful shutdown.
>
> Thanks, Erick