[cisco-voip] Unity 8.5.1

[Cristina Petre]

Hi Ed,

Thanks for answering. Ive also created a pilot number but my pilot number is assigned to forward all on the line to reach the unity. Do you mean it that way? 
Could you explain me the steps I need to do? Thanks.

Von meinem iPhone gesendet

Am 29.10.2012 um 16:20 schrieb Ed Leatherman <ealeatherman at gmail.com>:

> The way I do this is setup a pilot number in CUCM and point to your unity connection line group, and then setup direct routing rule in unity connection to send the call to the call handler greeting that you want it to go to.
> 
> On Mon, Oct 29, 2012 at 11:19 AM, Cristina Petre <cristina_petre80 at yahoo.de> wrote:
> Hi all,
> 
> If i want to use call handlers in unity how is the connection between cucm and unity?
> The goal should be to dial a number from external to reach the cucm after that the unity to get a welcome message and after that to go back to cucm to a pilot point.
> 
> I've created a directory number with voice mail pilot and voice mail profile, on unity I've created a system call handler with a transfer rule back to cucm and recorded a greeting. It's works but the problem is after I dial the number I get an "sorry.. Is not available" message after that phones in hunt lists ringing. I just want to hear my message nothing else.
> 
> What's wrong on my configuration? Many thanks in advance.
> 
> Von meinem iPhone gesendet
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> 
> -- 
> Ed Leatherman
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121029/4dd1f5bf/attachment.html>