[cisco-voip] For Caller ID on a PRI

[Joseph Mays]

More specifically, we are using an AS5400 to generate a PRI to a customer's 
phone system. We've done this several times before, but we've always been 
generating NI PRI's. What's different about this is it's the first time 
we've generated a 5ESS PRI. Everything works for incoming calls, but our 
softswitch is rejecting outbound calls from the customer's phone system 
because we are not seeing Caller ID on the calls. The customer's phone 
system was connected to a PRI from windstream prior to this and they insist 
it was sending caller ID. We're not sure why we're not seeing it. There is 
no caller ID showing up in q931 debugging, and I'm trying to determine if 
it's in q921 detail or frame debugging info, but in the meantime we just 
figured if there was a way to inject the caller-id in at the serial 
interface that would solve the problem, too.

Does anyone know of a reason why we might not be seeing caller-id on a 5ESS 
PRI?


----- Original Message ----- 
From: "Joseph Mays" <mays at win.net>
To: "Andreas Sikkema" <asikkema at unet.nl>; <cisco-voip at puck.nether.net>
Sent: Monday, September 17, 2012 1:31 PM
Subject: Re: [cisco-voip] For Caller ID on a PRI


>> I've always understood that command to rewrite caller id on calls
>> going out on the ISDN interface.
>
> Yeah, you're right. So I'm still looking for a way to rewrite this on 
> incoming calls through the interface.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip