[cisco-voip] CUCM - Pulling Phone Screenshots

[Rittenhouse, Robert (LACA)]

I am in the planning stages of writing some internal tools for CUCM/Unity 8.5(1). One of the tools will need to pull a screenshot of any phone on the cluster. I am trying to find the best way to accomplish this specific task. Do I create a single application user and keep assigning that user every device as a "controlled" device?

It seems if I add them as a controlled device I am able to authenticate at http://phoneip/CGI/Screenshot

Is there a better way to do this? One Demo utility from Uplinx tells you to enable Extension Mobility on all phones before using the tool. Is this the solution? If so, is it disruptive to do in mass?

Also, are there any other online groups/communities where we can discuss these types of topics? I can't find much for API/AXL programming besides at Cisco Developer Network.

Thanks!
________________________________
PLEASE NOTE: This message and any response to it may constitute a public record, and therefore may be available upon request in accordance with Ohio public records law. (ORC 149.43)

This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120913/4fffc91f/attachment.html>