[cisco-voip] Cisco Call Manager RBT Problem with AS5400 MTP Device

He-Man batuk at bilgisayarkurdu.org
Tue Sep 18 03:01:59 EDT 2012


Yes, I have already know , but we are going to use our actual devices 
unlike any other 28xx, 38xx routers. So we are going to use this 
configuration ; Sip + G.729 + Prack mode Enabled for RBT problem.I will 
send the results of this lab Nick.If you have any other idea, you can share.

Thanks.


> No IOS will solve this problem. You have to engineer your design to 
> not require MTPs. Do you know why you have MTPs enabled? It's commonly 
> an interop problem or a DTMF mismatch (RFC 2833-> out of band (h245 
> alpha, sccp, mgcp ntfy, etc).
>
> -nick
>
> On Mon, Sep 17, 2012 at 1:55 AM, He-Man <batuk at bilgisayarkurdu.org 
> <mailto:batuk at bilgisayarkurdu.org>> wrote:
>
>     Hi Nick ,
>
>     Previous week a friend in forum; has sent a feedback for this
>     trouble privately.There is not a bug , but 5400 routers works with
>     G.711 codec in that situation.Is it possible to solve this problem
>     any new IOS version ? We must use 5400 router for this topology ,
>     how can we configure the parameters any more ? Is there any
>     specific configuration , like SIP & G.729 or H.323 & G.711 ?
>     Because , we have tried this configurations, both of them are
>     working.Although , when we have choose Sıp + G.729 , we took
>     release problem, voip calls are disconnect.When we change the
>     H.323 + G.729 protocol we took ring back tone problem for that Mtp
>     problem.
>
>     I hope to solve this problem with your feedbacks.
>
>
>     Thanks,
>
>
>>     AS5x00 doesn't support MTP's.  Only thing that does is VGD-1T3.
>>
>>     -nick
>>
>>     On Sun, Sep 16, 2012 at 10:53 AM, He-Man
>>     <batuk at bilgisayarkurdu.org <mailto:batuk at bilgisayarkurdu.org>> wrote:
>>
>>         Do you have any idea ,for this trouble guys ?
>>
>>
>>
>>         13 Eyl 2012 tarihinde 15:55 saatinde, He-Man
>>         <batuk at bilgisayarkurdu.org
>>         <mailto:batuk at bilgisayarkurdu.org>> şunları yazdı:
>>
>>         > Hello ,
>>         >
>>         >  We have CUCM v7.x  and also use with Cisco As5400 gateway
>>         to translate calls h323 to sip with G.729 codec.But we have a
>>         problem ; when we use AS5400 device for MTP, a problem occurs
>>         immediately.We are facing a ring back tone problem.We have
>>         look the ethereal traces ,it can't work  fast start so it
>>         didn't ring any ring back tone.Is there any bug when call
>>         manager use with as5400 mtp device ?
>>         >
>>         > Scenario is ; location send traffic to CUCM then call
>>         manager send packets to As5400 for translating codec then
>>         send to softswitch
>>         >
>>         > We want to use  , Cucm as5400 link with H.323 then we want
>>         to use As5400 - SBC link with SIP.How is the situation ?
>>         Could you help please. If you want to ask any question , you can.
>>         >
>>         > Thank you.
>>         >
>>         > _______________________________________________
>>         > cisco-voip mailing list
>>         > cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>>         > https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>         _______________________________________________
>>         cisco-voip mailing list
>>         cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>>         https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120918/59ead021/attachment.html>


More information about the cisco-voip mailing list