[cisco-voip] UCCX 8 Database Dips

[Tim]

Thanks Paul, I rebuilt the DB Get step and it worked.  I then read your reply. :-)

-----Original Message-----
From: Paul [mailto:asobihoudai at yahoo.com] 
Sent: Tuesday, September 18, 2012 11:09 AM
To: Tim; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] UCCX 8 Database Dips

Since this is an encoding problem (requesting ascii string of 0 but receiving unicode replacement string instead) perhaps this may be of assistance...

https://supportforums.cisco.com/thread/2047655

________________________________
From: Tim <bcchimp at gmail.com>
To: cisco-voip at puck.nether.net 
Sent: Tuesday, September 18, 2012 10:57 AM
Subject: [cisco-voip] UCCX 8 Database Dips


Hi All,

Upgrading from UCCX 7.15 to UCCX 8.5 su2  I have the external database all setup and can dip into it with no problem.   When I use DBGet, it’s giving me the value:  U"\uFFFD"  in my string.  The value I should be getting from the DB is “0”

I’m using the same external database as UCCX 7 and same db read and db get.  All steps go to the successful area, but it’s pulling that incorrect data.  Anyone see this before?

Thanks,
Tim
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip