[cisco-voip] International Calling on PRI (prefix 011)

[Nicholas Samios]

This may not be what you're after but might help - can do it in translation rules

voice translation-rule 12345
 rule 1 // /0011/ type international international plan any isdn

vgw1#test voice translation-rule 12345 121255555555 type international
Matched with rule 1
Original number: 121255555555   Translated number: 0011121255555555
Original number type: international     Translated number type: international
Original number plan: none      Translated number plan: isdn


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
Sent: Wednesday, 19 September 2012 1:53 PM
To: Cisco VoIPoE List
Subject: [cisco-voip] International Calling on PRI (prefix 011)

PBX w/PRI ----> Cisco ISR ---> CUBE SIP Trunk ---> [SERVICE PROVIDER]

If the PBX uses the PRI's D-Channel to flag a call as international, but the dialed digits do not include 011, is there a way to prepend 011 in front of the dialed digits based on "international" being present in the D-channel Q931 messaging?  


Thanks,
Mark


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip