[cisco-voip] International Calling on PRI (prefix 011)

[Paul]

Perhaps this would work?

voice translation-rule x
rule 1 // /011&/ type international international
voice translation-profile pbxINTprefix
translate called 1

voice-port x/y/z:23/15
translation pattern out pbxINTprefix




----- Original Message -----
From: Mark Holloway <mh at markholloway.com>
To: Cisco VoIPoE List <cisco-voip at puck.nether.net>
Cc: 
Sent: Tuesday, September 18, 2012 11:53 PM
Subject: [cisco-voip] International Calling on PRI (prefix 011)

PBX w/PRI ----> Cisco ISR ---> CUBE SIP Trunk ---> [SERVICE PROVIDER]

If the PBX uses the PRI's D-Channel to flag a call as international, but the dialed digits do not include 011, is there a way to prepend 011 in front of the dialed digits based on "international" being present in the D-channel Q931 messaging?  


Thanks,
Mark


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip