[cisco-voip] right fax sr140 transmission errors

[Eric Pedersen]

Are you using passthrough or relay? Our rightfax is configured for T.38 version 0 and it works well. You can see it in the SIP settings in the Brooktrout Configuration Tool. I don't think our rightfax version even does ECM although I think I read the newer ones do which could also cause problems.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: 18 September 2012 4:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] right fax sr140 transmission errors

we just moved to a Virtual Right fax with the new virtural SR140 fax board.  Thus we are now doing a SIP trunk to call manager.

we are getting a lot of transmission errors.  anyone have any ideas?  the T1 CAS is coming in on a 3845 with NO controller errors.

I think maybe it has something to do with transmission speed or ECM but does anyone know if you can turn that stuff off?  any other thoughts?

TIA

Scott

The contents of this message may contain confidential and/or privileged
subject matter. If this message has been received in error, please contact
the sender and delete all copies. Like other forms of communication,
e-mail communications may be vulnerable to interception by unauthorized
parties. If you do not wish us to communicate with you by e-mail, please
notify us at your earliest convenience. In the absence of such
notification, your consent is assumed. Should you choose to allow us to
communicate by e-mail, we will not take any additional security measures
(such as encryption) unless specifically requested.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120919/ea50fe2c/attachment.html>