[cisco-voip] anyone have a good rightfax setup using MGCP and SIP?

[Eric Pedersen]

What is your gateway signaling protocol? Are you using T.38 and sure that it is negotiating?

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: 21 September 2012 10:30 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] anyone have a good rightfax setup using MGCP and SIP?

We continue to have transmission issues with our New Vitural RightFax server.  Dialogic and Opentext keep pointing to the T1 which the Telco says after 26 minutes of testing that it's clean.

We are noticing that most of the transmission errors are coming from the east side of the State.  (we are on the West side).  wondering if it's line issues in the rural areas?  but How the hey do you fix that?  any other thoughts?  We have done some LIMITED testing of bring the Faxing in on a PRI rather than a CAS T1 with a little better success...... but I'm not willing to bet the house on it.  CM 7.1 and VGW 3845 running 15.1(3)T2

TIA

Scott

The contents of this message may contain confidential and/or privileged
subject matter. If this message has been received in error, please contact
the sender and delete all copies. Like other forms of communication,
e-mail communications may be vulnerable to interception by unauthorized
parties. If you do not wish us to communicate with you by e-mail, please
notify us at your earliest convenience. In the absence of such
notification, your consent is assumed. Should you choose to allow us to
communicate by e-mail, we will not take any additional security measures
(such as encryption) unless specifically requested.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120921/801dbd10/attachment.html>