[cisco-voip] Transfer using BLF Speed Dial on 9.1

[Matthew Loraditch]

9951 with CKEM, buttons setup as Speed Dial BLFs,  User gets the call, hits transfer, hits the speed dial, hitting transfer again does not complete the call, nor does the transfer softkey appear, a new call has been created.
Dialing the destination manually works fine. I can replicate this on two different systems.

Has anyone seen this before?

Matthew G. Loraditch - CCNP-Voice, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130402/66bed8f5/attachment.html>