[cisco-voip] Transfer using BLF Speed Dial on 9.1

[Nate VanMaren]

Yeah it's a bug in the 9951 firmware.  Open up a case and get the ES.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Tuesday, April 02, 2013 10:22 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Transfer using BLF Speed Dial on 9.1

9951 with CKEM, buttons setup as Speed Dial BLFs,  User gets the call, hits transfer, hits the speed dial, hitting transfer again does not complete the call, nor does the transfer softkey appear, a new call has been created.
Dialing the destination manually works fine. I can replicate this on two different systems.

Has anyone seen this before?

Matthew G. Loraditch - CCNP-Voice, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>



 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130402/03710d88/attachment.html>