[cisco-voip] Transfer using BLF Speed Dial on 9.1

Bernhard Albler bernhard.albler at gmail.com
Tue Apr 2 12:32:34 EDT 2013


This is a bug in fw 9.3.2, you will need to get an ES




On 02.04.2013, at 18:27, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

  9951 with CKEM, buttons setup as Speed Dial BLFs,  User gets the call,
hits transfer, hits the speed dial, hitting transfer again does not
complete the call, nor does the transfer softkey appear, a new call has
been created.

Dialing the destination manually works fine. I can replicate this on two
different systems.



Has anyone seen this before?



Matthew G. Loraditch – CCNP-Voice, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter <http://twitter.com/heliontech>  |
Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
| Website <http://www.heliontechnologies.com/>  |  Email
Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130402/5cae9246/attachment.html>


More information about the cisco-voip mailing list