[cisco-voip] local route group question

Fri Aug 2 19:26:17 EDT 2013

DNA ignores called/calling transformations patterns along with Device Mobility. Additionally, as others have discussed it simply says Local Route Group, but does not show the substitution for which route group/trunk was used.

Dennis Heim | Sr. Unified Collaboration Team Lead & Solution Architect
World Wide Technology | 314.212.1814 | dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
"Creating Impact, Ignition & Scalability"

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Friday, August 02, 2013 3:39 PM
To: Erick Wellnitz; Divin John (dijohn)
Cc: cisco-voip
Subject: Re: [cisco-voip] local route group question

Interesting, my destinations are trunks to CUBE routers. I wonder if that's why they don't show up for me. I will have to check that out

Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>

From: Erick Wellnitz [mailto:ewellnitzvoip at gmail.com]
Sent: Friday, August 02, 2013 4:30 PM
To: Divin John (dijohn)
Cc: Matthew Loraditch; cisco-voip
Subject: Re: [cisco-voip] local route group question

I snipped it short of the gateway but it also shows the gateway.  My earlier issue was due to a misconfiguration, which is why DNA was wrong.  Calls routed but not to the expected RL/GW.  I resolved the configuration issue and now it looks to be working.

gateway.  [cid:image001.png at 01CE8FAD.C771C800]

On Fri, Aug 2, 2013 at 3:13 PM, Divin John (dijohn) <dijohn at cisco.com<mailto:dijohn at cisco.com>> wrote:
Hi Erick,

Looks like it will show the LRG. But not the actual gateways in it.

<B>Symptom:</B>

DNA results just show 'Local Route Group' but do not show the devices in the route

group. The problem is that DNA does not do a search to determine the appropriate

LRG for the selected calling device.

<B>Conditions:</B>

Occurs if doing an analysis of a pattern that points to a route list containing the

Standard Local Route Group.

<B>Workaround:</B>

Manually look at the device pool for the calling device to determine the configured

route group for that device, then manually look at the settings of those devices to

determine any transformations.

I hope its clear now,

Regards,

Divin

From: Erick Wellnitz <ewellnitzvoip at gmail.com<mailto:ewellnitzvoip at gmail.com>>
Date: Saturday, 3 August 2013 12:52 AM
To: Divin John <dijohn at cisco.com<mailto:dijohn at cisco.com>>
Cc: Matthew Loraditch <MLoraditch at heliontechnologies.com<mailto:MLoraditch at heliontechnologies.com>>, cisco-voip <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: Re: [cisco-voip] local route group question

It works in my 9.1.1 version.[cid:image002.png at 01CE8FAD.C771C800]

On Fri, Aug 2, 2013 at 2:04 PM, Divin John (dijohn) <dijohn at cisco.com<mailto:dijohn at cisco.com>> wrote:
Hi All,

We have CSCui45645 (DNA does not show local route group information) for
this issue. As this is an enhancement request, there's no ETA as of now.

Regards,

Divin

From:  Matthew Loraditch <MLoraditch at heliontechnologies.com<mailto:MLoraditch at heliontechnologies.com>>
Date:  Friday, 2 August 2013 10:15 PM
To:  Erick Wellnitz <ewellnitzvoip at gmail.com<mailto:ewellnitzvoip at gmail.com>>, cisco-voip
<cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject:  Re: [cisco-voip] local route group question

DNA doesn¹t go past the SLRG and show the actual RG chosen.
http://imgur.com/3W0bMcP
That¹s from a 9.1 install.

Matthew G. Loraditch  CCNP-Voice, CCNA-R&S, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830<tel:410.252.8830>
fax.  410.252.9284<tel:410.252.9284>

Twitter <http://twitter.com/heliontech>  |
Facebook <http://www.facebook.com/#!/pages/Helion/252157915296>  |
Website <http://www.heliontechnologies.com/>  |
Email Support
<mailto:support at heliontechnologies.com<mailto:support at heliontechnologies.com>?subject=Technical%20Support%20Reques
t>

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>]
On Behalf Of Erick Wellnitz
Sent: Friday, August 02, 2013 12:15 PM
To: cisco-voip
Subject: [cisco-voip] local route group question

Does anyone know if using DNA will invoke the local route group properly
or does it only work properly for live calls?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130802/249adc57/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 32552 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130802/249adc57/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 11980 bytes
Desc: image002.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130802/249adc57/attachment-0001.png>