[cisco-voip] Loud Ringer

[Mike King]

ATA and a traditional loud ringer is still one of the few options.

Here's my List:
1. FXS port off router and loud ringer
2. ATA (187?) and loud ringer
3. Algo 8180
http://www.algosolutions.com/products/Audible-and-Visual-Alerting/8180-sip-audio-alerter.html

Personally, I'd go with any of the above.

In the far out there, but should work catagory

I've heard of this, but never seen it.
http://www.doro.co.uk/Products/Other-products/Doro-RingPlus/
If it hears a phone ring, it trips off.

http://www.sandman.com/wizard.html#AudioControlRelay
You could use this to "Make" something work.

Good luck.


On Fri, Dec 20, 2013 at 10:59 AM, Ben Story <ben.story at gmail.com> wrote:

> The last time I ran into this I had to use an ATA and a traditional loud
> ringer.  I was wondering if anyone knew of a solution that could take its
> cue to ring from the EHS/AUX port of a Cisco phone?
> --
> Ben Story
> CCSP, CCNA, CCNA Wireless, CCDA
> ben.story at gmail.com
> @ntwrk80
> http://showbrain.blogspot.com
> http://rand0mw0rds.blogspot.com
>
>
> "From sour-faced saints and silly devotions, good Lord, preserve us!". -- St.
> Teresa of Avila
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131220/193bf93b/attachment.html>