[cisco-voip] Loud Ringer

[Brian Meade (brmeade)]

Ben,

It's technically possible to use a device with Enhanced Headset Control for this as the phone will send an event about the new call.  I do not know of any product utilizing this feature though.

Brian

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ben Story
Sent: Friday, December 20, 2013 10:59 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Loud Ringer

The last time I ran into this I had to use an ATA and a traditional loud ringer.  I was wondering if anyone knew of a solution that could take its cue to ring from the EHS/AUX port of a Cisco phone?
--
Ben Story
CCSP, CCNA, CCNA Wireless, CCDA
ben.story at gmail.com<mailto:ben.story at gmail.com>
@ntwrk80
http://showbrain.blogspot.com
http://rand0mw0rds.blogspot.com<http://rand0mw0rds.blogspot.com/>


"From sour-faced saints and silly devotions, good Lord, preserve us!". -- St. Teresa of Avila
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131220/01d10619/attachment.html>