[cisco-voip] MCS (HP) CUCM 6 installation via iLO virtual media

[Wes Sisk]

Or you could just order the bootable media via PUT.
take the reverse engineering/workaround/hacking time and invest in other deliverables
and then follow a supported and well traveled path.

-wes

On Feb 4, 2013, at 6:52 AM, Boon <ciscovoipuser at gmail.com> wrote:

Hi, 

Does anybody know if it's possible to install CUCM via the virtual drive of the iLO port on a HP MCS server?

I have to carry out a Publisher rebuild and bridge upgrade from 6.1.3 to 8.6(2a)SU2. 

As I've been unable to make the CCO 'non-bootable' 6.1.3 ISO bootable I've had to resort to building from a 6.0(1)a installation DVD. This means that my upgrade path is 5 steps long. I also need to rinse and repeat this exercise at a later date to get a fresh CUCM 8.6 DRS backup file. 

Any tips on installing via the virtual drive on an iLO would be useful.It seems to work for the pre-configuration tasks within the CUCM install but then I hit a Redhat Linux OS install GUI shortly after it reboots. 

Thanks

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip