[cisco-voip] Add new SUB to Production Cluster 9.1.1.10000-11

[Wes Sisk]

TAC does not have a reliable process for doing this.  The reliable process is a sales order via PUT or your account team.

Regards,
Wes

On Feb 24, 2013, at 10:57 PM, Matthew Loraditch <MLoraditch at heliontechnologies.com> wrote:

The only place I know is PUT or begging in a TAC case.

Sent from my iPhone

On Feb 24, 2013, at 10:23 PM, "Tim Frazee" <tfrazee at gmail.com> wrote:

> how and where?
> 
> On Sun, Feb 24, 2013 at 11:41 AM, Mark Drucker <drucker.mark at gmail.com> wrote:
>>  
>> Hi Alice,
>>  
>> A bootable ISO is available for 9.1.1.10000-11.
>>  
>> -Mark
>> 
>> 
>> On Sun, Feb 24, 2013 at 2:37 AM, Alice Borgo <bertacco.alessandro at alice.it> wrote:
>>> Yes, is correct Van.
>>> 
>>>  
>>> 
>>> Is NOT possible use Bootable 9.0 CUCM and use the Patch/Upgrade procedure to go on 9.1.1.10000-11. After some time, the procedure stop with error of "Incompatible version upgrade".
>>> 
>>>  
>>> 
>>> So, what can we do?
>>> 
>>>  
>>> 
>>> I need to ask Cisco if exist a Bootble version of 9.1.1.10000-11?
>>> 
>>>  
>>> 
>>> Thank you.
>>> 
>>>  
>>> 
>>> Regards
>>> 
>>>  
>>> 
>>> Alessandro
>>> 
>>>  
>>> 
>>> Da: Van Benschoten, Brian [mailto:Brian.VanBenschoten at COREBTS.com] 
>>> Inviato: sabato 23 febbraio 2013 21:18
>>> A: Mark Drucker
>>> Cc: Alice Borgo; cisco-voip at puck.nether.net
>>> Oggetto: Re: [cisco-voip] Add new SUB to Production Cluster 9.1.1.10000-11
>>> 
>>>  
>>> 
>>> I found recently this won't work with CUCM 9.0. 
>>>  
>>> Mark Drucker <drucker.mark at gmail.com> wrote:
>>>  
>>> Hi Alice,
>>> 
>>> You can install from the 9.0 bootable image and tell it to look for a patch/upgrade as part of the install.
>>> 
>>>  
>>> 
>>> Mark
>>> 
>>>  
>>> 
>>> On Sat, Feb 23, 2013 at 10:19 AM, Alice Borgo <bertacco.alessandro at alice.it> wrote:
>>> 
>>>  
>>> 
>>> Hi all,
>>> 
>>>    I need to add a second SUB on a production Cluster composed of1 PUB + 1 SUB that are in version 9.1.1.10000-11.
>>> 
>>>  
>>> 
>>> But I don't have bootable ISO of 9.1.1.10000-11, because the cluster was upgraded from 9.0 version.
>>> 
>>>  
>>> 
>>> What Can I do?
>>> 
>>>  
>>> 
>>> Thank you for the answer
>>> 
>>>  
>>> 
>>> Regards
>>> 
>>>  
>>> 
>>> Alessandro Bertacco
>>> 
>>> 
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>> 
>>> 
>>> 
>>> 
>>> -- 
>>> Mark Drucker
>>> (925) 321-5791
>>> 
>>>  
>>> 
>>> Important Notice: This email message and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Core BTS. Core BTS specifically disclaims liability for any damage caused by any virus transmitted by this email.
>> 
>> 
>> 
>> -- 
>> Mark Drucker
>> (925) 321-5791
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130225/4866a305/attachment.html>