[cisco-voip] mgcp channel out of service

[abbas Wali]

I tried using
isdn busy b-channel X
as well but it didnt make any difference and I believe that was rightly so,
as that one is only used in case of SIP or H323 and MGCP is back-hauling L3
to CUCM so it wont affect the channel on the gateway.

Carlo, when you say disable you mean to bring back into service ???

On 25 February 2013 16:33, Carlo <carlo_calabrese2006 at yahoo.com> wrote:

> I found out the hard way too. you can only fix it by restarting the
> controller card.
>
> The right way is under Service Parameter (advanced view)
> Look for Change B-Channel Maintenance Status and do it that way.
> Works OK.  click on the wording and it will explain how to disable it.
>
> Carlo
>
> Sent from my iPad
>
> On Feb 25, 2013, at 4:23 AM, abbas Wali <abbaseo at gmail.com> wrote:
>
> Folks,
>
> Enable Status Poll - on a card & *Change B-Channel Maintenance Status X: *putting
> a 1 or 2 will bring the channel out of service (graceful/non graceful) and
> I believed a 0 will bring them back into service.
>
> But its not the case and eventually have to reboot the controller.
> Is that really how its supposed to be OR we have missed something.
>
> we are on cucm 8.5 with mgcp gateways.
>
> thanks
> --
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
@bbas..
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130225/8c34ed38/attachment.html>