[cisco-voip] mgcp channel out of service

[Carlo]

I found out the hard way too. you can only fix it by restarting the controller card.

The right way is under Service Parameter (advanced view)
Look for Change B-Channel Maintenance Status and do it that way. 
Works OK.  click on the wording and it will explain how to disable it.

Carlo

Sent from my iPad

On Feb 25, 2013, at 4:23 AM, abbas Wali <abbaseo at gmail.com> wrote:

> Folks, 
> 
> Enable Status Poll - on a card & Change B-Channel Maintenance Status X: putting a 1 or 2 will bring the channel out of service (graceful/non graceful) and I believed a 0 will bring them back into service. 
> 
> But its not the case and eventually have to reboot the controller. 
> Is that really how its supposed to be OR we have missed something.
> 
> we are on cucm 8.5 with mgcp gateways.
> 
> thanks 
> -- 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130225/ae42f43c/attachment.html>