[cisco-voip] 7960 w/7914 BLF no alerting of monitored lines

[Nate VanMaren]

So you're not getting the flashing lights for BLF Pickup?  Is the Pickup box checked on the specific BLF you're testing?

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill Talley
Sent: Monday, February 25, 2013 11:07 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7960 w/7914 BLF no alerting of monitored lines

Hi all,

I recently performed an install of CUCM 9.1(1) and am having an issue with BLFs on a 7914 not lighting up when a monitoring DN is in alerting state.   The BLFs on the 7914 light solid red when the monitored line is in use.  I have a TAC case opened up on the issue and am awaiting feedback, but nothing has jumped out at TAC as the obvious cause.

I have the subscribe CSS set on the 7960 to a CSS that has visibility of the monitored lines (hence the busy lights).  Phones and sidecars are running the latest firmware.   Since the BLFs light up when the monitored line is in use, I'm guessing everything is configured correctly.

Does anyone have 7914s with BLFs that correctly reflect alerting state of a monitored line with a flashing or solid line button the 7914 on any linux version of CUCM?

TIA
Bill


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130225/7d7b69fb/attachment.html>