[cisco-voip] 7960 w/7914 BLF no alerting of monitored lines

[Florian Kroessbacher]

hy


look here, it's old but i think blf alerting is only possible on tnp phones


https://supportforums.cisco.com/thread/304989


http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html#wp308676
--
Florian Kroessbacher
gmail: florian.kroessbacher at gmail.com

On Mon, Feb 25, 2013 at 10:16 PM, Bill Talley <btalley at gmail.com> wrote:

> I've seen a restriction like that which applies to those phones running
> SIP, but nothing identifying that as a restriction to SCCP phones.  There
> are a couple of postings on the Cisco forums where people indicate their
> 7914s flash for their BLFs, but those are old postings from CUCM 5/6/7.
> Would you happen to have a reference link?
> Thanks
> Sent from an Apple iOS device with very tiny touchscreen input keys.
>  Please excude my typtos.
> On Feb 25, 2013, at 3:13 PM, Florian Kroessbacher <
> florian.kroessbacher at gmail.com> wrote:
> hy
> i think 7914 with 7960 there is only the busy/not busy indication possible
> on the sidecars.
> if u upgrade the phone to a 7961 with the sidcar will to alerting/busy/not
> busy
> cheers
> --
> Florian Kroessbacher
> gmail: florian.kroessbacher at gmail.com
> Am 25.02.2013 um 21:15 schrieb Nate VanMaren <VanMarenNP at ldschurch.org>:
>   So you’re not getting the flashing lights for BLF Pickup?  Is the Pickup
> box checked on the specific BLF you’re testing?
> *From:* cisco-voip-bounces at puck.nether.net [
> mailto:cisco-voip-bounces at puck.nether.net<cisco-voip-bounces at puck.nether.net>]
> *On Behalf Of *Bill Talley
> *Sent:* Monday, February 25, 2013 11:07 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] 7960 w/7914 BLF no alerting of monitored lines
> Hi all,
> I recently performed an install of CUCM 9.1(1) and am having an issue with
> BLFs on a 7914 not lighting up when a monitoring DN is in alerting state.
> The BLFs on the 7914 light solid red when the monitored line is in use.  I
> have a TAC case opened up on the issue and am awaiting feedback, but
> nothing has jumped out at TAC as the obvious cause.
> I have the subscribe CSS set on the 7960 to a CSS that has visibility of
> the monitored lines (hence the busy lights).  Phones and sidecars are
> running the latest firmware.   Since the BLFs light up when the monitored
> line is in use, I'm guessing everything is configured correctly.
> Does anyone have 7914s with BLFs that correctly reflect alerting state of a
> monitored line with a flashing or solid line button the 7914 on any linux
> version of CUCM?
> TIA
> Bill
> NOTICE: This email message is for the sole use of the intended recipient(s)
> and may contain confidential and privileged information. Any unauthorized
> review, use, disclosure or distribution is prohibited. If you are not the
> intended recipient, please contact the sender by reply email and destroy
> all copies of the original message.
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130225/2b85edbf/attachment.html>