[cisco-voip] 7960 w/7914 BLF no alerting of monitored lines

[Bill Talley]

Hi Florian,

I have seen that page, but haven't seen anything from a version later than
that indicating similar restrictions still apply.  TAC also has given no
indication that this still applies and is currently working to replicate
the issue in the lab, but I appreciate your efforts in helping me nail down
the issue.

Thanks again,
Bill

On Mon, Feb 25, 2013 at 3:48 PM, Florian Kroessbacher <
florian.kroessbacher at gmail.com> wrote:

> hy
>
> look here, it's old but i think blf alerting is only possible on tnp phones
>
> https://supportforums.cisco.com/thread/304989
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html#wp308676
> --
> Florian Kroessbacher
> gmail: florian.kroessbacher at gmail.com
>
>
> On Mon, Feb 25, 2013 at 10:16 PM, Bill Talley <btalley at gmail.com> wrote:
>
>> I've seen a restriction like that which applies to those phones running
>> SIP, but nothing identifying that as a restriction to SCCP phones.  There
>> are a couple of postings on the Cisco forums where people indicate their
>> 7914s flash for their BLFs, but those are old postings from CUCM 5/6/7.
>>
>> Would you happen to have a reference link?
>>
>> Thanks
>>
>>
>> Sent from an Apple iOS device with very tiny touchscreen input keys.
>>  Please excude my typtos.
>>
>> On Feb 25, 2013, at 3:13 PM, Florian Kroessbacher <
>> florian.kroessbacher at gmail.com> wrote:
>>
>> hy
>>
>> i think 7914 with 7960 there is only the busy/not busy indication
>> possible on the sidecars.
>> if u upgrade the phone to a 7961 with the sidcar will to
>> alerting/busy/not busy
>>
>> cheers
>>
>> --
>> Florian Kroessbacher
>> gmail: florian.kroessbacher at gmail.com
>>
>> Am 25.02.2013 um 21:15 schrieb Nate VanMaren <VanMarenNP at ldschurch.org>:
>>
>>  So you’re not getting the flashing lights for BLF Pickup?  Is the
>> Pickup box checked on the specific BLF you’re testing?
>>
>>
>>
>> *From:* cisco-voip-bounces at puck.nether.net [
>> mailto:cisco-voip-bounces at puck.nether.net<cisco-voip-bounces at puck.nether.net>]
>> *On Behalf Of *Bill Talley
>> *Sent:* Monday, February 25, 2013 11:07 AM
>> *To:* cisco-voip at puck.nether.net
>> *Subject:* [cisco-voip] 7960 w/7914 BLF no alerting of monitored lines
>>
>>
>>
>> Hi all,
>>
>> I recently performed an install of CUCM 9.1(1) and am having an issue
>> with BLFs on a 7914 not lighting up when a monitoring DN is in alerting
>> state.   The BLFs on the 7914 light solid red when the monitored line is in
>> use.  I have a TAC case opened up on the issue and am awaiting feedback,
>> but nothing has jumped out at TAC as the obvious cause.
>>
>> I have the subscribe CSS set on the 7960 to a CSS that has visibility of
>> the monitored lines (hence the busy lights).  Phones and sidecars are
>> running the latest firmware.   Since the BLFs light up when the monitored
>> line is in use, I'm guessing everything is configured correctly.
>>
>> Does anyone have 7914s with BLFs that correctly reflect alerting state of
>> a monitored line with a flashing or solid line button the 7914 on any linux
>> version of CUCM?
>>
>> TIA
>> Bill
>>
>>
>>
>> NOTICE: This email message is for the sole use of the intended
>> recipient(s) and may contain confidential and privileged information. Any
>> unauthorized review, use, disclosure or distribution is prohibited. If you
>> are not the intended recipient, please contact the sender by reply email
>> and destroy all copies of the original message.
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130225/089149ff/attachment.html>