[cisco-voip] pointers to the basic AA tcl script I can use with SRST

[Nate VanMaren]

So are you only using the CUE when the site is in SRST/CME mode?

Then I really wouldn’t worry about integrating to CM…

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
Sent: Wednesday, February 27, 2013 11:47 AM
To: Nate VanMaren
Cc: voip puck
Subject: Re: [cisco-voip] pointers to the basic AA tcl script I can use with SRST

Thanks Nate.

I took a look at the compatibility matrix, which showed the AIM version we can go to is not supported. It's interesting to hear that you've got your AIM versions working with CUCM v9.1.

Not sure what to do really, I'd like to have a game plan rather than hoping it will work. We haven't had too many link down events, so I don't need anything special, that's where the script would have helped.

ugh.





---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

________________________________
From: "Nate VanMaren" <VanMarenNP at ldschurch.org<mailto:VanMarenNP at ldschurch.org>>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>>, "voip puck" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Wednesday, February 27, 2013 12:16:28 PM
Subject: RE: [cisco-voip] pointers to the basic AA tcl script I can use with SRST


Leilo,

What CUE mess are you in?

I know they are getting rid of them, and were working twords that, but we have lots of them from AIM-CUE to ISM-300 SREs and they are working just fine against CM 9.1, without upgrades or special JTAPI re-syncs.

I understand there may be a support issue, but I am trying to say just because it’s not supported doesn’t mean it’s not going to work.

-Nate
From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Wednesday, February 27, 2013 9:48 AM
To: voip puck
Subject: [cisco-voip] pointers to the basic AA tcl script I can use with SRST


Can anyone point me to the basic AA tcl script I can use with SRST? I'm going to try and evaluate it as a possible short term alternative to this CUE module mess we're in.

Thanks, Lelio


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)


NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.



 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130227/a5022ed1/attachment.html>