[cisco-voip] Calling Party Transformation Patterns on CUCM 8.x

[Zoltan.Kelemen at emerson.com]

Hi and a Happy New Year!

CUCM 8.5.1 and I'm trying to globalize calling numbers of outgoing calls on a specific SIP trunk.

My problem is, there are more than one DID ranges, i.e.:
1XXX numbers would have +40 345 671 XXX
2XXX numbers would have +40 341 232 XXX

I want to make sure to set the proper caller ID/calling number on outgoing calls. (I can do that since it's an internal SIP trunk, so any callerID is ok)

So I've created a partition and a CSS for transformations and added a Calling Party Transformation Pattern (Call Routing > Transformation > Transformation Pattern > Calling Party Transformation Pattern), applied it properly to the SIP trunk etc.

For testing I have created a single test pattern, with my own extension: 2356
This matched and applied the transformations I was expecting. I tested it with changing the transformations, it kept working.

However, when I rewrote the pattern to 2XXX it stopped matching. Basically it seems that I'm unable to use any non-specific pattern to match the calling party number. (neither 2!, nor 235X nor anything else that I've tried seems to match)

Any ideas?

Thanks,
Zoltan Kelemen
Emerson

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130103/7b5e8eb4/attachment.html>