[cisco-voip] Cisco UCCE Outbound dialer

[Reto Gassmann]

Hello Group

Perhaps someone knows the difference between the two outbound SIP dialer
configurations "SIP Dialer with SIP Proxy" and "SIP Dialer with no SIP
Proxy".
We have a UCCE 8.0 and plan to Upgrade to 9.0 and move to UCS. For this we
have to change our dialer from sccp to SIP. We plan to have two ISR 3945
with dsp and pri Interfaces (E1). We also have a CUBE with a SIP Trunk to
our carrier. However Cube is not supported with outbound dialer.

Tank for feedback
Regards Reto
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130108/72ad3f7e/attachment.html>