[cisco-voip] Mobility Issue

[Dane Newman]

This is what the music sounds like

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Video.MOV
Type: video/quicktime
Size: 1086147 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130114/b80834b0/attachment.mov>
-------------- next part --------------


Sent from my mobile device

On Jan 14, 2013, at 3:40 PM, Dane Newman <dane.newman at gmail.com> wrote:

> Hello
>  
> I have an issue when users are connected to a call and  hit the mobility soft key button on 9971 phones when a call is active, the phone system rings on the mobile number configured in the system.  When they pick up the the mobile number it just plays what sounds like hold music on both ends of the call (I believe this music is coming from cucm but I haven't heard it before) instead of providing 2 way voice. 
>  
> In another senario with what I believe is the same issue. If a user picks up on there cell phone first (using single number reach) opposed to the deskphone the call is connected with 2 way voice and no issues exist.  If the user then hangs up his cell phone with the intent to take the call on his deskphone the calling party starts hearing the hold music.  Once the user picks up the call on his deskphone he hears nothing but the calling party is still hearing the hold music.  It is not working as intended where 2 way voice happens once the user hangs up his mobile phone and picks up on his deskphone 2 way voice should happen.
>  
> My topology is as follows..
>  
>  
> PSDN --> SIP TRUNK FROM ITSP --> 3825 CUBE --->CUCM -->DESKPHOHE
>  
> Calls are sent back out the SIP trunk to the ITSP when using mobile connect/snr.
>  
> Does anyone have any ideas how I can make 2 way voice happen instead of the hold music when the calls are picked up?