[cisco-voip] vg224 fxs port facility codes

[Joe Pollere (AM)]

Needs to be SCCP to support the supplemental features.

From: abbas Wali [mailto:abbaseo at gmail.com]
Sent: Wednesday, January 16, 2013 8:30 AM
To: Joe Pollere (AM)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] vg224 fxs port facility codes

thanks for that,

on the cfwdall, does the GW must be on SCCP as

1. enable

2. configure terminal

3. stcapp call-control mode feature

or an mgcp based VG can support the same features.



Thanks



On 16 January 2013 11:49, Joe Pollere (AM) <joe.pollere at dimensiondata.com<mailto:joe.pollere at dimensiondata.com>> wrote:
Set the VG224 to use SCCP and supplemental features:

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html

You can set audible message waiting and feature codes for cfwd.

Joe

------Original Message------
From: abbas Wali
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] vg224 fxs port facility codes
Sent: Jan 16, 2013 6:28 AM



Hi,

I am required to configure VOIP phone facilities for the traditional analogue phones connected via the FXS on VG's. Facilities like, cFwdAll and voicemail.
in the voicemail, though they won have the softkey but they can dial the Voicemail pilot to hit their Unity mail box. but the problem is the notification i.e. how will we alert them for new voicemial????

we are using CUCM 8.5 with MGCP gateways
thanks
--
@bbas..

itevomcid



--
@bbas..
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130116/ecd63aa1/attachment.html>