[cisco-voip] UC on UCS C-Series Datastore Setup

[Ryan Ratliff]

Keep in mind that deviating from our install guides on a TRC drops you back to specs-based support in terms of UC on UCS.  Not that you will have any issues but it is something you need to be aware of in the case that things really start to go south. 

I'm sure the 2 array configuration was done both data protection and for performance.  We haven't found any real benefit to using the flexible flash drives for TRCs (since we aren't limited by disk space and the hypervisor mostly runs in RAM anyway) which is why it isn't included in our guides.

-Ryan

On Jan 22, 2013, at 12:21 PM, Boon <ciscovoipuser at gmail.com> wrote:

Thanks for the info Ryan and Jason. 

I'm deploying a C-220-M3 server with a Flexible Flash card which as 4 virtual drives with a dedicated one for VM onto which I have installed ESXi hypervisor. Therefore I'm guessing that the two RAID arrays approach was meant for earlier c-series models without flash cards right?

I've setup the HDD as a single RAID5 which is inline with the tested reference guide on the UCS wiki. I just want to know if I can create a single datastore or whether it's better practice to create two and keep the ISO discs separate. I think the VM doc will give me the answer hopefully. Thanks.



On Tue, Jan 22, 2013 at 5:08 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
If you have a TRC then you can find instructions in here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CA526319_00_cucm-on-virtualized-servers_chapter_00.html

If you are specs-based, then it's expected you know how to structure your datastore(s) to meet your needs so there won't be specific instructions.

All of our docs that I've run through have instructions for configuring two separate RAID arrays, one for ESXi and ISOs, and another for VMs.  The ones I've done have been RAID 1 and RAID 5 (respectively) and these are usually done at the same time, before you install ESXi.  

-Ryan

On Jan 22, 2013, at 10:45 AM, Boon <ciscovoipuser at gmail.com> wrote:

Hi, 

I'm in the process of building my first C-Series UCS server from scratch. 

I've configured RAID, installed ESXi and have logged into vSphere. I need to configure a datastore which I'm ok with. 

I have a question regarding the datastore setup. Is there any recommendations from Cisco on how to configure these logically?

I've seen a couple of installs that have two datastores, one for VMs and another for ISO images etc for quick rebuilds..

I have a 1.9TB of disk space to use and I'd like to set it up in line with best practice if I can. 

Thanks, 

Rab
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130122/8006cae6/attachment.html>