[cisco-voip] g729 gateway / transcoding?

[Zoltan.Kelemen at emerson.com]

Hi,

This may be a very basic question, but I'm looking for a straight forward answer, and so far couldn't find anything.

I have a remote voice gateway, with an E1 card connecting to a PBX on one end and SIP trunk towards the WAN on the other.
On the WAN I'd like to have g729.

The router has a PVDM3-64 inside.

Do I need to set up transcoding as well, or is it enough to specify
codec g729br8
on the voip dial-peer?

Thanks,

Zoltan Kelemen
Emerson

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130128/c671874f/attachment.html>