[cisco-voip] Can't Configure CAD Client...

[Jonathan Charles]

Ran it in XP Mode and it worked fine; this is a Win7 64-bit issue....


On Mon, Jul 1, 2013 at 9:57 AM, Kevin Damisch
<kevin.damisch at vitalsite.com>wrote:

>  Only way I could get past that was to run it on a Windows XP machine.
> No matter what compatibility mode we chose in Windows 7, we always got that
> error.
>
>
>
> Kevin Damisch
>
> Vital Support Systems
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Jonathan Charles
> *Sent:* Monday, July 01, 2013 9:10 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Can't Configure CAD Client...
>
>
>
> can't run client config tool (9.0.2), I get the following error while it
> is trying to upload the file:
>
>
>
>
>
> LmMsiCfg
>
> Error opening DB: error = d<110>
>
>
>
> Any ideas?
>
> ------------------------------
>
> This communication (including any attachments) is intended only for the
> use of the individual or entity to which it is addressed, and may contain
> information that is privileged, confidential and exempt from disclosure
> under applicable law. If you are not the intended recipient, any
> dissemination, distribution or copying of this communication is strictly
> prohibited. If you have received this communication in error, please notify
> Vital Support Systems at 515 334 5700 and delete or destroy all copies
> and the original document.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130701/d441c529/attachment.html>