[cisco-voip] NTP Problem Cucm ver 8.6.2

[Ed Leatherman]

Ahhh i missed that in the original message, only some phones affected.


On Sun, Jul 7, 2013 at 9:51 AM, Bryant Onojeta <onojetathekid at gmail.com>wrote:

> If, it's only some phones having the problem…then we assume the that ntp
> with the cucm is accurate…the pub will be the master and the subs will get
> ntp from the pub.
>
> I guess more info is needed, but the itl file deletion was recommended
> from cisco on OUR particular issue.
>
> -Bryant
>
> From: Ed Leatherman <ealeatherman at gmail.com>
> Date: Sun, 7 Jul 2013 09:48:43 -0400
> To: James Dust <james.dust at charles-stanley.co.uk>
> Cc: Bryant Onojeta <onojetathekid at gmail.com>, Kenneth Hayes <
> kennethwhayes at gmail.com>, "cisco-voip at puck.nether.net" <
> cisco-voip at puck.nether.net>
>
> Subject: Re: [cisco-voip] NTP Problem Cucm ver 8.6.2
>
> I wonder if Call Manager is looking for a particular maximum stratum for
> it's NTP source before it will use that time, and maybe your 6500 is now
> sending with a worse stratum? See these two:
>
> http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080b2cd0e.shtml
> https://supportforums.cisco.com/thread/2044292
>
> what does the 'utils ntp status' command show?
>
> Would be really strange if you had to clear ITL out to fix time display.
>
> On Sun, Jul 7, 2013 at 3:49 AM, James Dust <
> james.dust at charles-stanley.co.uk> wrote:
>
>> Morning,
>>
>>
>>
>> Yes the switch is back up and has been for some time.
>>
>>
>>
>> Is there a way of doing this procedure remotely?
>>
>>
>>
>> Kind Regards
>>
>>
>>
>> James
>>
>>
>>
>>
>> --
> Ed Leatherman
>



-- 
Ed Leatherman
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130707/b3c62d8a/attachment.html>