[cisco-voip] 7835-H2 stuck at apply BIOS and RAID Firmware???

Erick Wellnitz ewellnitzvoip at gmail.com
Wed Jul 24 12:37:04 EDT 2013


I saw something similar a number of months back.  I tried doing a standard
maintenance window reboot and several of the servers looked like they came
back up if you looked at the box but they were unpingable.  Power cycle
with the power button did the same.

I had to physically unplug the servers from power and then plug them back
in and power up to resolve the problem.


On Wed, Jul 24, 2013 at 6:56 AM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  Thanks, I have a spare of this entire server that we ended up after
> migrating another customer to UCS/VMWare, I’m going to send that adapter
> onsite and see what happens.****
>
> ** **
>
> ** **
>
> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> voice. 410.252.8830
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>
> ****
>
> ** **
>
> ** **
>
> *From:* Jason Aarons (AM) [mailto:jason.aarons at dimensiondata.com]
> *Sent:* Tuesday, July 23, 2013 10:46 PM
> *To:* Matthew Loraditch; cisco-voip at puck.nether.net
> *Subject:* RE: 7835-H2 stuck at apply BIOS and RAID Firmware???****
>
> ** **
>
> They should pull in HP support.  Sounds like a raid controller failure.  I
> would suggest swapping the raid controller before any wipe/reinstall!!  To
> avoid data loss they should involve HP immediately.****
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<cisco-voip-bounces at puck.nether.net>]
> *On Behalf Of *Matthew Loraditch
> *Sent:* Tuesday, July 23, 2013 9:48 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] 7835-H2 stuck at apply BIOS and RAID Firmware???**
> **
>
> ** **
>
> ** **
>
> I have a SW Only, HP DL380G5 (upgraded to 4GBs of RAM and 146GB HD), went
> to do a reboot yesterday and it didn’t recover, kept booting but looping at
> applying BIOS/RAID Firmware. TAC said we had to wipe and reinstall. Trying
> that now and setup is looping at same screen. BIOs is at latest version
> available (and that has been on the server for literally years now).****
>
> Has anyone seen anything like this? I have a feeling tomorrow is going
> involve a fight between TAC and HP support about replacing something.****
>
> ** **
>
> ** **
>
> Matthew G. Loraditch – CCNP-Voice, CCNA, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> voice. 410.252.8830
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>
> ****
>
> ** **
>
> ** **
>
>
>
> itevomcid ****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130724/54ea9583/attachment.html>


More information about the cisco-voip mailing list